Manufacturer Good Price EPOXY RESIN CURING AGENT PACM CAS#1761-71-3

short description:

EPOXY RESIN CURING AGENT PACM (PACM for short) exists in three stereoisomers with different thermodynamic properties: trans-trans, cis-trans, and cis-cis. EPOXY RESIN CURING AGENT PACM is an important alicyclic diamine, and EPOXY RESIN CURING AGENT PACM is mainly used to prepare alicyclic dicyclohexylmethane diisocyanate (H12MDI) or directly used as epoxy resin curing agent.

PACM is colorless or slightly yellow viscous or white waxy object, with a relative density of 0.9608. The melting point is 35 ~ 45 ℃. Boiling point 159 ~ 164 ℃ (0.67kpa). The refractive index is 1.5030. Easy to dissolve in toluene, petroleum ether, ethanol, tetrahydrofuu, etc.

CAS: 1761-71-3

Product Detail

Product Tags



Applications of PACM

EPOXY RESIN CURING AGENT PACM can be used to process various types of environmentally friendly polyurethane coatings and adhesives with good transparency and yellowing resistance. The epoxy resin cured by EPOXY RESIN CURING AGENT PACM has Chemicalbook's excellent heat resistance, dielectric properties, solvent resistance, mechanical properties, as well as excellent optical properties, weather resistance, and can be used in damping materials, optical materials, coatings, Engineering plastics, adhesives and other fields.

  1. 4,4'-Methylenebis(cyclohexylamine) is a potential high inhibitive and high temperature resistant shale inhibitor.
  2. 4,4'-Diaminodicyclohexyl methane be used as organic intermediates and epoxy curing agents.
  3. 4,4'-Diaminodicyclohexylmethane is used as epoxy curing agents. It is a versatile intermediate to produce leather, rubber products, plastics, dyes, and photo sensitive polymers. It is used in manufacturing diisocyanates and polyamides. It is also used as lubricant additive as and corrosion inhibitor.

Preparation: Diversify 1g titanium dioxide powder in 40ml of water and methanol mixture (water to a methanol volume ratio of 9: 1), stir well after mixing evenly, add 60 μmol/ml RUCL3 · XH2O dark brown aqueous solution to control the amount of titanium dioxide in titanium dioxide The load is 5WT %. After 3 hours of sealing the room temperature seal and stirring for 3 hours, add 1m sodium hydroxide solution until PH10.5 continues to seal and stir for 20 hours. After the centrifugation and water and ethanol mixture was washed with water and ethanol for 3-5 times, 60 ° C. catalyst. Fresh prepared catalysts are placed in the reactor, a certain volume of solvents are added, and an appropriate amount of 4,4’- two Chemicalbook amin aminomyl methane (MDA) is added. After 10 times, the closed reactor was rinsed with a hydrogen reaction kettle to 150 ° C to start the reaction. The Moore ratio of the hydrogen and MDA was not less than 80, and the hydrogen pressure was 1 to 5MPa, and the reaction product and conversion rate were taken in real time. The benzene ring in MDA can be quickly hydrogen to generate a single benzene ring hydrogenation product (+6H) and the hydrogenation of hydrogenation of bisopyzhenbenzhenyl. It is worth mentioning that the 4,4'-dihydrophill methal methane is a raw compound of a special nylon.

Specification of PACM




Colorless transparent liquid

Color (Platinum cobalt)


Viscosity (mPa/s,25℃) (ISO2555)


Amine Value (ASTM D2074)


Water content


Content ( gas chromatographic)


Packing of PACM

Logistics transportation1
Logistics transportation2

190KG / barrel

Storage should be at cool, dry and ventilate.


  • Previous:
  • Next:

  • Write your message here and send it to us