page_banner

Products

  • Manufacturer Good Price  Sodium Sesqui Carbonate  CAS:533-96-0

    Manufacturer Good Price Sodium Sesqui Carbonate CAS:533-96-0

    Sodium Sesqui Carbonate, alias, is sodium of sodium carbonate, semi -alkali,and the molecular formula is NA2CO3 · NAHCO3 · 2H2O. Bicarbonate sodium is a chemical of white needle -shaped crystals, sheet -like or crystalline powder. The relative molecular mass is 226.03, and the relative density is 2.112. At 100 ° C, it is 42%. The aqueous solution is alkaline, and its alkali is weaker than sodium carbonate. It is made by a certain proportion of sodium carbonate and sodium bicarbonate solution.

    Characteristics:Sodium Sesqui Carbonate is a white needle-shaped crystal, sheet -like or crystalline powder. The relative density is 2.112, which is not easy to weather. At 42%at ° C, the aqueous solution is alkaline, and sodium bicarbonate is weaker than sodium carbonate.

    Synonyms:Carbonicacid,sodiumsalt(2:3);magadisoda;snowflakecrystals;sq810;Sodium Sesquicarbonat;trisodiumhydrogendicarbonate;urao;SODIUM CARBONATE, SESQUIOXIDE DIHYDRATE

    CAS: 533-96-0

    EC No.: 205-580-9

  • Manufacturer Good Price   PERCHLOROETHYLENE  CAS:127-18-4

    Manufacturer Good Price PERCHLOROETHYLENE CAS:127-18-4

    PERCHLOROETHYLENE: is also known as a whole chloride. In terms of molecular structure, the compounds generated by all hydrogen atoms in ethylene were replaced by chlorine. In 1821, the first time it was made by FaraDay thermal decomposition. Colorless transparent liquid. There is a ether -like smell. Nonflammable.

    CAS: 127-18-4

  • Manufacturer Good Price  Pentamethyldipropylenetriamine (PMDPTA) CAS:3855-32-1

    Manufacturer Good Price Pentamethyldipropylenetriamine (PMDPTA) CAS:3855-32-1

    PMDPTA is a low -smelling foam/gel balance catalyst, which can be used in polyether -type polyurethane soft foam, polyurethane hard bubbles and coating adhesives. PMDPTA is especially used in cold mold HR foam. PMDPTA is called five -base di -propyleneramine, which has a wide range of applications in various soft and hard foams. PMDPTA can provide a balanced starting response and gel response, and extend the foam reaction and gel response time. This catalyst can not only be used alone, but also shares with other catalysts and auxiliary agents. PMDPTA can be dissolved in polyether polyol.

    It is easily dissolved in most solvents. Foam and gel reaction balance. The advantages are used in soft block foam, which can avoid the cracking and pinhole of the foam, which has excellent raising performance. Improve the processability, tolerance and surface curing performance of hard foam. Improve the higher hole of soft foam plastic.

    Property properties: boiling point: 102 ° C / 1mmHg, density: 0,83 g / cm3, refractive index: 1.4450 to 1.4480, flash point: 92 ° C, acidity coefficient (PKA): 9.88 ± 0.28 (Predict). It is mainly used for alkaline melting phenols, and also used for inter -phenylphenols, etc., and is often used as catalysts in esterization and dehydration reactions; dye intermediate

    CAS: 3855-32-1

  • Manufacturer Good Price  EPOXY RESIN CURING AGENT PACM  CAS#1761-71-3

    Manufacturer Good Price EPOXY RESIN CURING AGENT PACM CAS#1761-71-3

    EPOXY RESIN CURING AGENT PACM (PACM for short) exists in three stereoisomers with different thermodynamic properties: trans-trans, cis-trans, and cis-cis. EPOXY RESIN CURING AGENT PACM is an important alicyclic diamine, and EPOXY RESIN CURING AGENT PACM is mainly used to prepare alicyclic dicyclohexylmethane diisocyanate (H12MDI) or directly used as epoxy resin curing agent.

    PACM is colorless or slightly yellow viscous or white waxy object, with a relative density of 0.9608. The melting point is 35 ~ 45 ℃. Boiling point 159 ~ 164 ℃ (0.67kpa). The refractive index is 1.5030. Easy to dissolve in toluene, petroleum ether, ethanol, tetrahydrofuu, etc.

    CAS: 1761-71-3

  • Manufacturer Good Price  OP200 Epoxy Silane Oligomer  CAS: 102782-97-8

    Manufacturer Good Price OP200 Epoxy Silane Oligomer CAS: 102782-97-8

    The appearance of OP200 Epoxy Silane Oligomer is colorless to pale yellow transparent liquid, which belongs to epoxy modified polysiloxane. Compared with conventional epoxyxane, it maintains a good epoxy reaction activity and coupling effect. Storage stability is widely used in the fields of modified plastics, coatings and other fields.

    CAS:102782-97-8

  • Manufacturer Good Price  N-ETHYL PYRROLIDONE (NEP)  CAS: 2687-91-4

    Manufacturer Good Price N-ETHYL PYRROLIDONE (NEP) CAS: 2687-91-4

    NEP is a colorless and transparent liquid with high polarity, high chemical stability and high thermal stability. NEP is boiling point is 82-83°C (-101.3Kpa), the refractive index is 1.4665 Chemicalbook, and the density is 0.994. NEP has the characteristics of high solubility, low vapor pressure and low dielectric constant. Industrially, NEP can be used as efficient selective solvent, catalyst and cationic surfactant.

    N-ETHYL PYRROLIDON has weak alkali; NEP is a strong polar organic solvent that can be dissolved with any proportional proportions with water and general organic solvents.NEP’s use is a divestitist of lithium batteries, dry glue skilled, and optical resistant corrosion agent, coating unfolding agent, and epoxy resin glue edge.

    CAS: 2687-91-4

  • Manufacturer Good Price  ALTERNATIVE OF CAPTURE 3800   CAS: 72244-98-5

    Manufacturer Good Price ALTERNATIVE OF CAPTURE 3800 CAS: 72244-98-5

    ALTERNATIVE OF CAPTURE 3800 is a sulfhydryl terminated liquid epoxy curing agent with the characteristics of colorless, transparent and low odor. In the presence of tertiary amine promoters, and Epoxy resin can be cured rapidly at low temperature and film conditions. The gel time can be reduced by selecting appropriate tertiary amine accelerator reduced to 4 minutes. ALTERNATIVE OF CAPTURE 3800 has excellent adhesion and can be used as a promoter to improve the curing speed of resin and other amine curing agents degrees.

    CAS:  72244-98-5

  • Manufacturer Good Price  N,N-Dimethylcyclohexylamine(DMCHA) CAS: 98-94-2

    Manufacturer Good Price N,N-Dimethylcyclohexylamine(DMCHA) CAS: 98-94-2

    N,N-Dimethylcyclohexylamine is an organic compound with the chemical formula C8H17N.N,N-Dimethylcyclohexylamine is a colorless and transparent liquid, insoluble in water, soluble in most organic solvents such as ethanol and ether. N,N-Dimethylcyclohexylamine is mainly used as a catalyst and a rubber accelerator. Intermediate, can also be used for fabric treatment.

    Chemical properties: melting point: -60 ° C, boiling point: 158-159 ° C (LIT.) Density: 0.849g/mlat25 ° C (LIT.) Vapor pressure: 3.6mmhgchemicalbook (20 ° C) refractive index: n20/d1. 454 (LIT.) Flash point: 108 ° F Storage conditions: Storebelow+30 ° C.

    CAS: 98-94-2

  • Manufacturer Good Price  Dibutyltin Dilacetate (DBTDA)  CAS: 1067-33-0

    Manufacturer Good Price Dibutyltin Dilacetate (DBTDA) CAS: 1067-33-0

    Dibutyltin diacetate is a clear yellow liquid., acts as a crosslinking catalyst. Easy to process and can be used up to 250°C. Dibutyltin diacetate is insoluble in water and soluble in most organic solvents. Used in silanol condensation reactions for caulk and sealant applications.

    EineCS number: 213-928-8, molecular formula: C12H24SN, molecular weight: 351.03, melting point: 7-10 ℃, Water solution: Insoluble SN content: 32.5 ± 0.5% , Density: 1.32 ± 0.005 (20 ℃), Boiling point: 140 ~ 144 ℃/10mmhg, physical standards standard : Light yellow or colorless and transparent liquid with acetic acid smell. It is solid or semi -solid below 10 ° C. Coisturizing point: 8-10 ℃.

    CAS: 1067-33-0

  • Manufacturer Good Price  D2000  CAS: 9046-10-0

    Manufacturer Good Price D2000 CAS: 9046-10-0

    Amine-TerminatedPolyether (D2000) is a class of polyolefin compounds with a soft polyether backbone, capped by primary or secondary amine groups. Because the main chain of the molecule is a soft polyether chain, and the hydrogen on the terminal of polyether amine is more active than the hydrogen on the terminal hydroxyl group of polyether, therefore, polyether amine can be a good substitute for polyether in some material processes, and can improve the application performance of new materials. D2000 are widely used in polyurethane reactive injection molding materials, polyurea spraying, epoxy resin curing agents and gasoline scavengers.

    Chemical Properties:Poly(propylene glycol) bis(2-aminopropyl ether) is a light yellow or colorless transparent liquid at room temperature, with the advantages of low viscosity, low vapor pressure and high primary amine content, and is soluble in solvents such as ethanol, aliphatic hydrocarbons, aromatic hydrocarbons, esters, glycol ethers, ketones and water.

    CAS: 9046-10-0