UOP MOLSIV™ RZ-4250 Adsorbent – INCHEE

Typical Physical Properties (nominal)

• Mesh Beads
  	4×8	8×14
  Nominal particle size diameter (mm)	2.5-5	1-2.4
  Poured density (lb/ft3)	50	52
  Crush strength (lb)	20	10
  Water capacity (17 TOR) Wt%	12.5	12.5
  Residual water (as shipped) %	<1.5	<1.5

Regeneration

The H2O is rejected from the RZ 4250 adsorbent bed by purging with an appropriate regeneration gas at elevated temperatures. The degree of regeneration is dependent on the flowrate, temperature, pressure and composition of the purge gas.

Safety and handling

See the UOP brochure “Precautions and Safe Practices for Handling Molecular Sieves in Process Units” or call your UOP representative.

Shipping Information

• • RZ-4250 adsorbent is available in steel drums or quick load bags.

For more information

• • www.incheeintl.com