-
UOP GB-222 Adsorbent
Description
UOP GB-222 adsorbent is a high capacity spherical metal oxide adsorbent designed to remove sulfur compounds. Features and benefits include:
- Maximized active component for higher capacity compared to previous generations
- High surface area substrate to optimize dispersion of the active metal oxide to extend bed life.
- Customized active metal oxide for ultra-low level impurity removal.
- High degree of macro-porosity and pore size distribution for rapid adsorption and short mass transfer zone.
-
Manufacturer Good Price SILANE (A1160) 3-UREIDOPROPYLTRIETHOXYSILANE 50% SOLUTION IN METHANOL CAS: 7803-62-5
Silane is a colorless, spontaneously flammable (pyrophoric) gas. Silane has a choking odor and may form explosive mixtures with air. Silane will react violently with heavy metal halides and free halogens other than hydrogen chloride.
Synonyms :flots100sco;Monosilane;SiH4;Silicane;Silicon hydride;Silicon hydride (SiH4);tetrahydrure;tetrahydruredesilicium
CAS: 7803-62-5
-
UOP GB-217 Absorbent
Description
UOP GB-217 absorbent is a spherical metal oxide absorbent designed for the removal of trace sulfur compounds.
-
Manufacturer Good Price SILANE (A174) CAS: 2530-85-3-Methacryloxypropyltrimethoxysilane
3-Methacryloxypropyltrimethoxysilane is a methacryl-functional silane, 3-Methacryloxypropyltrimethoxysilane is a clear, light and heat sensitive liquid with a faintly sweet odour.
3-Methacryloxypropyltrimethoxysilane is used as adhesion promoter at organic/inorgainc interfaces, as surface modifier (e.g. imparting water repellency, organophilic surface adjustment) or as crosslinking of polymers).3-Methacryloxypropyltrimethoxysilane is used as a coupling agent to improve the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins under exposure to heat and/or moisture.CAS: 2530-85-0
-
Manufacturer Good Price Polyetheramine T403 CAS:9046-10-0
Polyetheramine T403 is a class of polyolefin compounds with a soft polyether backbone, capped by primary or secondary amine groups. Because the main chain of the molecule is a soft polyether chain, and the hydrogen on the terminal of polyether amine is more active than the hydrogen on the terminal hydroxyl group of polyether, therefore, Polyetheramine can be a good substitute for polyether in some material processes, and can improve the application performance of new materials. Polyetheramine are widely used in polyurethane reactive injection molding materials, polyurea spraying, epoxy resin curing agents and gasoline scavengers.
CAS: 9046-10-0
-
UOP CLR-204 Adsorbent
Description
UOP CLR-204 non-regenerative adsorbent is the preferred product for removing trace HCl from Olefin-containing hydrocarbon streams. CLR-204 adsorbent provides the highest chloride capacity in commercial service, while significantly minimizing green oil and organic chloride formation. Features and benefits include:
Optimized pore size distribution leading to higher capacity.
High degree of macro-porosity for rapid adsorption and short mass transfer zone.
High surface area substrate to extend bed life.
Customized adsorbent for ultra low activity in process streams. -
Manufacturer Good Price Dimethyl Sulfoxide (DMSO) CAS 67-68-5
Dimethyl sulfoxide (referred to as DMSO) is a sulfur-containing organic compound, the English Dimethylsulfoxide, the molecular formula is (CH3) 2SO, is a colorless, odorless and transparent liquid at room temperature, a hygroscopic flammable liquid, and has both high polarity. , high boiling point, aprotic, miscible with water, extremely low toxicity, good thermal stability, immiscible with alkanes, soluble in most organic substances such as water, ethanol, propanol, ether, benzene and chloroform, known as For the “universal solvent”.
CAS: 67-68-5
-
UOP CG-731 Adsorbent
Description
UOP CG-731 adsorbent is a specialty alumina adsorbent that has a high capacity and selectivity for carbon dioxide. Features and benefits include:
- Optimized pore size distribution leading to higher capacity.
- High degree of macro-porosity for rapid adsorption and short mass transfer zone.
- High surface area substrate extends bed life.
- Available in either steel drums or quick load bags.
-
Manufacturer Good Price DMTDA CAS:106264-79-3
DMTDA is a new type of polyurethane elastomer curing cross-linking agent, DMTDA are mainly two isomers, 2,4- and 2,6-dimethylthiotoluenediamine mixture (the ratio is about Chemicalbook77~80/17 ~20), compared with the commonly used MOCA, DMTDA is a liquid with lower viscosity at room temperature, DMTDA can be suitable for construction operations at low temperature and has the advantages of low chemical equivalent.
CAS: 106264-79-3
-
Manufacturer Good Price P-TOLUENESULFONYLISOCYANATE (PTSI) CAS 4083-64-1
P-TOLUENESULFONYLISOCYANATE (PTSI) is a single functional isocyanate. P-TOLUENESULFONYLISOCYANATE (PTSI) has high activity and can react with conventional diisocyanates, such as TDI and HDI, with water in polyols and solvents. The resulting carbamate does not increase the viscosity of the system. The disadvantage is that the toxicity of oxazolidine and other dehydrants is large; P-TOLUENESULFONYLISOCYANATE (PTSI) reacts with water to produce carbon dioxide and toluenesulfamide, so P-TOLUENESULFONYLISOCYANATE (PTSI) cannot be used directly in paint formulations and is generally used for pre-dehydration. To remove 1g of water in the solvent, about 12g of PTSI is theoretically required, but the actual amount should be higher than this.
CAS: 4083-64-1
